中文  EN
Home About us QC After-sales FAQ Press Contact us

Press

How to set up IR learning function of AK-101

Sources: this site    Click:    Date: 2018-1-6 7:11:54

1-Getting into IR programming mode. 

Long press "white power on", at first, the LED indication on top of AK-101 will flash in Red, then it will stay red still, then release the "white power on" button. Click "white power on" again, the led indicator will flash in red again, at this time point your IR remote which you want to be programmed directly to AK-101, and long press the "power on" of the IR remote, until the LED indicator of AK-101 in still RED again, now you are in the programming/copy mode. 


2-Copy your IR remote to AK-101. 

Click the button of AK-101 you want to copy, the LED indicator flashes in RED, and then click the knob of the IR remote which you want to be copied, if it is programmed successfully, the LED indicator will first flashes in RED more quicker and then turn to still RED, otherwise it is not successfully. 

Press the next knob of AK-101, Repeat above process until you have programmed all of the knobs of your IR remote control to AK-101. 


3-Exit IR programming mode. 

click "Green/RED power on" button of AK-101 to exit the IR programming mode. 


4-Now you are ready to use our AK-101 to control everything. 


You can also refer to below video, 

https://youtu.be/Nj2KuQheRlE

Copyright©2016 YIXU Industrial CO.,LTD. All Rights Reserved. google site map